This is a video for 180 degree rotation pallet inverter with double clapper.
A 180 degree rotation pallet inverter is a device used to flip pallets to the opposite side for unloading. It works by lifting one side of the pallet while dropping the other side, causing it to invert. The “double clapper” design lifts both sides of the pallet at once, then inverts it using gravity. This provides a fast, smooth flipping motion.
To operate, a forklift loads a pallet onto the pallet inverter carriers. The forklift then moves underneath one side of the carriers and lifts up. This raises one side of the pallet. At the same time, the other side of the carriers drop down, flipping the pallet over. The forklift then removes the inverted pallet for unloading. Some key features of the inverter include: 1) Two lifting carriages to raise opposites sides of the pallet; 2) A pivot point where the carriages meet in the middle; 3) Spacers to allow clearance for pallet overturn; 4) Safety locks to prevent unintentional dropping; 5) Forklift slots for easy pallet loading and unloading.
This pallet flipping method avoids dragging or shuffling the pallet which could damage the goods. With a well-maintained inverter and properly trained operator, pallets can be inverted quickly while keeping products intact. However, there are risks of pallet instability or dropping during the flipping process so caution must be exercised. Routine inspections should also be performed to ensure all parts are functioning properly before operation.
For more pallet inverters just here